Special Interest Group - Pixhawk

The Pixhawk Reference Standards are developed on public weekly calls, faciliated by Dronecode Foundation.
Schedule: Bi-Weekly on Tuesday @ 16:00UTC 9am Pacific Standard Time 6pm Central European Time 12am Beijing/Shanghai/HongKong Time
The Autopilot/FMU working group are tasked to define the overall hardware architecture, pin-out definition and other related information for manufactures to produce an autopilot product.
Links to On-Going Work:
Links to Completed Work:
The payload working group is tasked with defining the needs of a cross-vendor MAVLink enabled payload interface using open-source. The goal is to define or augment the payload management sub-protocol in MAVLink, and define the minimum requirements for a Hardware implementation.
Links to On-Going Work:
The BMS working group is tasked to standardize as much as possible the hardware and software requirements for the drone industry and subsequent implementation on PX4.
Links to On-Going Work:
Pixhawk is a registered trademark of Dronecode Project, Inc., all rights reserved.
Designed by Elegant Themes | Powered by WordPress